To remove the “You do not have a valid subscription for this server” popup message while logging in, run the command bellow. You’ll need to SSH to your Proxmox server or use the node console through the PVE web interface. If you have issues and need to revert changes please check the instructions at the bottom
Show configuration
/opt/smartstorageadmin/ssacli/bin/ssacli ctrl all show config
Controller status
/opt/smartstorageadmin/ssacli/bin/ssacli ctrl all show status
Show detailed controller information for all controllers
/opt/smartstorageadmin/ssacli/bin/ssacli ctrl all show detail
Show detailed controller information for controller in slot 0
/opt/smartstorageadmin/ssacli/bin/ssacli ctrl slot=0 show detail
Rescan for New Devices
/opt/smartstorageadmin/ssacli/bin/ssacli rescan
Physical disk status
/opt/smartstorageadmin/ssacli/bin/ssacli ctrl slot=0 pd all show status
Show detailed physical disk information
/opt/smartstorageadmin/ssacli/bin/ssacli ctrl slot=0 pd all show detail
Logical disk status
/opt/smartstorageadmin/ssacli/bin/ssacli ctrl slot=0 ld all show status
View Detailed Logical Drive Status
/opt/smartstorageadmin/ssacli/bin/ssacli ctrl slot=0 ld 2 show
NOTE: Check the name of your datastore and replace “datastore1” in these instructions with the appropriate name of your actual datastore.This process will get your Supermicro 1u w/ x7dca-l and 2 Xeon L5420’s running ESXi 5.1 with functional NICs, using a USB key:1) Download this file: https://hostupdate.vmware.com/software/VUM/OFFLINE/release-346-20120706-638484/ESXi500-201207001.zip2) Format a USB flash drive that is 2GB or less for
Bad Behavior has blocked 96 access attempts in the last 7 days.